Short Range Hand Wave Detector (Shadow Detector)

The circuit below works quite well in typical indoor room lighting. I would not recommend its use in direct sunlight. Two small PIN photo diodes positioned about one inch apart form a shadow detector. With no shadow cast on the devices, both devices produce nearly identical current levels. The current is converted to a voltage with two load resistors in parallel with the photo diode. One resistor is adjustable to the two voltages can be carefully balanced under uniform lighting. When a hand or an arm is moved over the sensors, casting a shadow, one device will detect more light than the second, as the shadow moves over the two sensors. This triggers an imbalance. A voltage comparator connected to the two devices detects the imbalance and sends a high logic level signal to an n-channel FET, which can turn on a beeper or activate a relay. If a low power voltage comparator is used, such as the LMC7211, a 9 volt battery will power the circuit for many years. The more popular LM358 would also work but would draw more current.


Click HERE to see a short movie (AVI File) of the device in action.

Share on Google Plus

About sNova

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.